How Much Does It Cost to Stucco a 1,000 Sq Ft House?

August 2025 · Education

A 1,000 square foot house typically costs between $10,000 and $19,000 to stucco in San Antonio, depending on the system you choose, wall height, the number of openings, and site conditions. Here is how the math breaks down.

Understanding Wall Surface Area

A 1,000 square foot house does not have 1,000 square feet of wall to stucco. Floor square footage and wall surface area are different measurements. A typical single-story 1,000 square foot home has roughly 1,200 to 1,500 square feet of exterior wall surface after accounting for wall height, gable ends, and subtracting window and door openings. Your actual wall area is what determines cost.

Cost Per Square Foot in San Antonio

In San Antonio, three-coat cement stucco installation runs $8 to $15 per square foot of wall surface. Using the typical 1,200 to 1,500 square feet of wall surface on a 1,000 square foot home, the total cost falls between roughly $10,000 and $22,000. Most 1,000 square foot homes land in the $10,000 to $19,000 range because they are single-story with standard wall heights and moderate complexity.

What Affects the Price

Wall preparation is the biggest variable. New construction over clean sheathing is at the lower end. Retrofit work that requires removing old siding, repairing substrate, or adding moisture barriers costs more. The number of stories matters — single-story homes are less expensive because no scaffolding is needed. The number and complexity of windows, doors, and architectural details affect labor time. Finally, the finish you choose impacts cost: a basic sand float finish costs less than a smooth Santa Barbara finish or custom texture work.

What the Price Includes

A quality stucco installation should include moisture barrier installation, metal lath attachment, three coats of cement stucco with proper curing time between coats, expansion joints at all required locations, and your chosen finish coat with integral color or paint. Make sure any estimate you receive covers all of these components — a low price that skips the moisture barrier or applies only two coats is not a bargain.

A Worked Example: 1,000 Sq Ft Home in San Antonio

A 1,000 sq ft single-story home is not 1,000 sq ft of stucco. Wall surface area on a typical 1,000 sq ft ranch — roughly 32 by 32 feet with 9-foot walls — comes out to about 1,150 sq ft of gross wall, minus about 180 sq ft for windows and doors, leaving roughly 970 sq ft of actual stucco surface. At San Antonio's typical $9 to $14 per square foot for a three-coat system, that puts a full installation between $8,700 and $13,600. Retrofit over existing siding adds $2 to $4 per square foot for tear-off and substrate prep, pushing the same house to $10,600 to $17,500. See our stucco installation services.

What Pushes the Price Up in San Antonio

Two stories add scaffolding and slow application — budget 15 to 25 percent more. Existing siding removal is the biggest single variable since you will not know the sheathing condition until it is open. Texture complexity matters too — a 20/30 sand finish costs less than a hand-troweled Santa Barbara, and matching an existing hand texture on an addition costs more than either. Summer application (July and August) needs earlier starts and more careful moisture control, which can add a day or two of labor. Tight side yards, mature landscaping and sloped lots all slow a crew down. Get a free stucco estimate.

For a free, detailed estimate on your specific home, contact our stucco installation team. We provide exact pricing based on your actual wall measurements and site conditions, with no hidden costs.

Call (210) 871-8490 for a free estimate. Email info@sanantoniostucco.com.